Description
DEA TRAFIK - Electromechanical Barrier for Intensive use up to 6m length (230V)
The TRAFIK electromechanical inverter barrier is designed to be installed in large car parks, commercial areas or industrial accesses with passages up to 6 metres wide, where it is necessary to manage important flows of vehicles, withstanding a continuous work cycle (up to 15 thousand manoeuvres per day).
INTENSE WORK AND LOW CONSUMPTION
TRAFIK works with a 230V three-phase voltage, which allows to work at low energy consumption despite the almost continuous work cycle.
FAST OPENING
With TRAFIK the entry and exit of vehicles in large contexts will be fast and smooth thanks to the fast 90° opening of the bar in only 1.5 seconds. Its rapid movement makes TRAFIK the ideal tool to avoid the accumulation of vehicles in sensitive and very busy passages.
SAFE AND SUPER SMOOTH MOVEMENT THANKS TO THE INVERTER
The inverter technology in combination with the sinusoidal linkage makes TRAFIK's movement precise, fast and super smooth.
In fact, the inverter controls the opening and closing speed of the bar and manages its slowdowns by adjusting the power delivered in each phase with absolute precision, avoiding sudden jerks and abrupt power interruptions.
TRAFIK is a precise and safe electromechanical barrier because it is equipped with a movement reading system which uses a magnetic encoder. The card detects the presence of obstacles and promptly blocks or reverses the direction of travel of the bar.
EASY MAINTENANCE AND FAST INSTALLATION
The installation of the TRAFIK electromechanical barrier takes very little time, as no special adaptation work is required for the application of the bar on both sides of the case.
If necessary, maintenance can also be quick and easy. In fact, thanks to the two doors and the removable cover, the internal mechanisms and electronics are easily accessible to the installer.
POWER AND LONG LIFE
To best withstand thousands of daily manoeuvres, TRAFIK is driven by a three-phase asynchronous gear motor in oil bath, controlled by inverter encoders. These two elements, as well as ensuring a high intensity of use, ensure a long service life for the entire installation.
EXCELLENT MATERIALS AND CORROSION-RESISTANT BOX
The TRAFIK barrier, like PASS N and STOP N, is resistant to mechanical and time wear thanks to the excellent materials used, such as the robust steel outer case, the metal motor gears and the internal steel linkage.
In addition, TRAFIK's outer case has a double anti-corrosion treatment, with a first cataphoresis coating and a second polyester powder coating. An absolute guarantee against wear and tear due to atmospheric agents.
DOUBLE COLOUR KIT
The TRAFIK electromechanical barrier is available in two different colours: orange (RAL2000) and light grey (RAL 9006). Each colour kit is made up of two small doors and a removable cover.
GREATER PROTECTION
Thanks to the burglar-proof system, when the bar is in its closed position, its levers are perfectly aligned: this makes manual forced movement impossible.
CONTROL THE BAR WITH YOUR SMARTPHONE
In TRAFIK it is possible to install NET-COM, a device connected to the Internet by means of a data SIM card that allows you to check the status of your electromechanical barrier, at any time and wherever you are, directly from your smartphone.
SPECIFICATION
| CODE |
PRODUCT |
BOOM LENGTH |
USE INTENSITY |
INTEGRATED CONTROL BOARD |
ENCODER |
LIMIT SWITCH |
OTHER CHARACTERISTICS |
| 646000 |
TRAFIK*
|
6 m |
Continuous use |
NET24NGR |
Yes |
Yes |
• Input power supply 230V
• Three-phase asynchronous 230V motor
• Control unit DE@NET NET24NGR
• Inverter-controlled
• Obstacle detection performed by the encoder
• Electro-mechanical limit switches included
|
| 646001 |
TRAFIK INOX**
|
6 m |
Continuous use |
NET24NGR |
Yes |
Yes |
*Main case complete with two doors and top cover with cataphoresis treatment, painted in anthracite RAL 7016.
**Main case complete with two doors and top cover in AISI 304 stainless steel with cataphoresis treatment, painted in anthracite RAL 7016.
Attention: boom, boom holder cover, flashing light circuit and foundation plate not included. Spring not included.
ACCESSORIES (Click to open)
Boom (BOOM/4 and BOOM/6)
Boom holder (OMEGA)
Foundation plate (TRAFIK/B)
LED Lights for barrier (LED/B)
LED Lights for beam (STRIP-LED)
Spring (MOLLA S and MOLLA XL)
Black rubber profile (GSOFTP)
Colour kit - orange and light grey
DOWNLOADS
NOTE:
- See product brochure in manual for additional information
- Please call the office for discounts on these and to specify other details of the purchase. 01564 731035
-
We offer a further 5% discount on all single orders over £1000 when using code "GAS5" at checkout.
