STOP N - Electromechanical Barrier for Intensive use up to 8m length (230V or 24V) - Barrier only

Description

DEA STOP N - Electromechanical Barrier for Intensive use up to 8m length (230V or 24V) - Barrier only

The STOP N electromechanical barrier is suitable for managing high-intensity traffic flows and work cycles, and it is the ideal solution to ensure safety and a smooth traffic flow in large car parks and in industrial accesses, even thanks to its ability to move bars having a length up to 8 metres.

MORE BARS FOR LARGE PASSAGES

With STOP N you can manage large passages using only one barrier. Thanks to BOOM LINK in fact it is possible to combine more bars until a maximum length of 8 metres. 

When the bar is very long, it inevitably tends to bend; to solve this issue, it is possible to install at the opposite side several accessories: the mobile support that stays connected to the bar (when opened, the passage is completely free), a fixed support on which the bar rests when closed (Art. 1010), and a fixed support with magnet (Art. 1010/M) to prevent the bar from being lifted manually. This way, STOP N becomes even more safe against unwanted access.

SAFETY AND SMOOTH MOVEMENT WITH THE ENCODER

STOP N is a precise and safe electromechanical barrier because it is equipped, in all models, with a movement reading system which uses a magnetic or digital encoder. The card detects the presence of obstacles and blocks or reverses the bar direction of travel. Moreover, in STOP N the encoder has a "soft start and stop" function, that allows you to set in the best way possible the bar speed during the opening and closing phase. The encoder makes the electromechanical barrier movement more reliable, smooth, and practical.

EASY AND FAST INSTALLATION

The STOP N electromechanical barrier is easy to install, and its set-up phase is fast. You only need to fasten the barrier body to the ground fastening bracket, adjust its balance according to the bar configuration, and start the procedure for the automatic learning movement.

EXCELLENT MATERIALS

The STOP N barrier, like PASS N and TRAFIK, is resistant to mechanical and time wear thanks to the robust outer case and to the excellent materials used, such as the painted steel shell and the metal gears. A guarantee that never lets you down.

CONTROL THE BAR WITH YOUR SMARTPHONE

Thanks to the DEAuser app, you can use your smartphone to open STOP N without needing keys or having to remember access codes. 

In addition, if you have also installed NET-COM with a data SIM card, then you can even check the status of the automation remotely, fine-tune the automatic opening and closing times, and check the access register via remote control.

SPECIFICATION

PRODUCT GUIDE

STOPNET/N/L-F, STOP24NET/N/V-F, STOP24NET/N/L-F models: RAL 7016 grey colour by cataphoresis treatment.

INOX models: AISI 304 stainless steel, RAL 7016 grey colour by cataphoresis treatment.

All models:

• Led lights, boom, boom holder and foundation plate are not included - see bellow for these accessories.
• The barrier must be balanced correctly in order to allow a proper way of operation.
• In case of additional accessories, verify the quantity of additional KIT MOLLA needed referring to the chart “ADDITIONAL KIT MOLLA” (see in downloads)

ATTENTION: you must use 1 NET24N control board with every barrier.

ACCESSORIES (Click to open)

Boom (BOOM/4 and BOOM/6)

Boom holder (OMEGA)

Foundation plate (STOP/B)

LED Lights for barrier (LED/B)

LED Lights for beam (STRIP-LED)

Spring (KIT MOLLA)

Black rubber profile (GSOFTP)

DOWNLOADS

• STOP N Brochure

NOTE:

• See product brochure in manual for additional information
• Please call the office for discounts on these and to specify other details of the purchase. 01564 731035
• We offer a further 5% discount on all single orders over £1000 when using code "GAS5" at checkout.