DGLS Select Pro Digital gatelock - fits up to 60mm gate frame

Description

DGLS Select Pro Digital gatelock - fits up to 60mm gate frame (DGLS01L, DGLS01R, DGLS02L, DGLS02R)

The Gatemaster Digital Gatelocks have been developed to meet the increased demand for keyless entry through gates.  This marine grade Digital Gatelock single sided (access via typing the code to enter, simple lever/handle action to exit) has many unique features.

The latchbolt will automatically latch into the gate frame as the door closes. To then open the gate, enter the code and turn the handle. If you need to keep the gate unlocked for a short time, this lock has a hold-back function allowing you to do just that. Simply activate with the switch on the rear handle.

This lock does not need any power to operate. Its high quality digital keypads ensure a long lasting durability.

Finally, the lock can only be taken off the gate when the gate is open, which requires the code.

• Auto-latching: closing the gate latches the latchbolt into the gate frame
• Marine grade keypad ensures long lasting durability (salt spray tested for 1000 hours)
• No power needed
• Latchbolt moves 20mm
• Brushed finish stainless steel bolt support plate with brass bearing.  Reduces friction, wear and increases product life.  Designed for heavy use gates.
• Strike plate included

PRODUCT DETAILS

Marine grade: Salt spray tested for 1000 hours.

Latchbolt: Adjustable, moves 22mm 7/8". Auto-latching when gate closes.

Includes: Strike plate.

No power needed.

DIMENSIONS

INSTALLATION

1. Drill 2 x 9mm (3/8") dia. holes at 92mm (3-5/8") centres for M8 fixing bolt.

2. Drill 18mm (3/4") clearance hole for latchbolt at 22mm (7/8") centres down from the top 9mm (3/8") hole.

3. Fix lock in place using stainless steel clamp plate, bolt support plate and 2 stainless steel countersunk fixing bolts supplied.

4. Drill clearance hole in gate post to receive the latchbolt. Slot this hole vertically to allow for gate sag – fix strike plate and bend back so the latchbolt slides smoothly.

5. Ensure latchbolt moves freely without binding on gate or frame.

6. HOW TO ADJUST To adjust latchbolt length and/or to change to RH/LH insert 3mm (1/8") long arm hex key (supplied) into end of bolt and release locking screw. Rotate bolt as required and re-tighten locking screw. Lubricate with light oil periodically.

MAINTENANCE

3 monthly:

1. Remove keypads from the lock

2. Spray the inside of the lock thoroughly with WD40 or equivalent, through the tumbler holes at the back of the lock

3. Spray all the fixing accessories and the latch with WD40 or equivalent. Push each of the buttons and rotate the knob several times to make sure the lock is working smoothly

DOWNLOADS

Select Pro DGLS Datasheet